Recording
Digital Audio Recording with MD Recorder
Only when the OPTICAL DIGITAL OUT of this receiver is connected to the OPTICAL DIGITAL IN of the MD recorder or CD
l l
recorder, you can enjoy high-quality sound of digital recording without converting the original signals. Refer to " CONNECTING
AUDIO COMPONENTS" and
"CONNECTING DIGITAL INs and OUT" on page 5 and 7 and the operating instructions of the MD recorder or CD recorder.
x x Notes:
Digital recording is available for the digital audio program sources such as CDs, MDs, some DVDs, etc.
l l
In most DVDs as well as some CDs, etc., digital recording may not be available depending on the signal format.
l l
There are some restrictions on recording digital signals. When making digital recordings, refer to the operating
l l
instructions of your digital recording equipment to know what restrictions are imposed.
Select a desired input of CD, TAPE MONITOR
1
and VIDEO 1~VIDEO 4 as a recording source.
INPUT SELECTOR
AUDIO
VIDEO
TAPE MON.
or
For digital recording, select the desired digital
2
input as recording signal input.
DIGITAL/ANALOG
Each time this button is pressed, the corresponding input is
l l
selected as follows :
DIGITAL
x x Note:
When the selected digital input is not connected,
l l
"DIGITAL" is flickering, meaning no recording as well
as no sound.
26
DVD
VOL.
CH LEVEL
OSD
CH SEL
ENTER
RPT
INTRO
A
B
TITLE
7.1 SURR
RETURN
AUTO
DSP
MODE
ST
CD
T1/MON
DISC
TEST
CENTER
P.SCAN
TONE
MODE
TUNER
CD
T1/MON
AUX
PHONO
VID1
VID2
VID3
VID4
VID5
VID1
VID2
VID3
VID4
SYS DISP
SLEEP
DIRECT IN
ROOM2
ANALOG
Start recording on the component connected to
3
OPTICAL DIGITAL OUT.
Start play on the desired input.
4