Low Radiation Compliance (Mpr Ii); Self Diagnostics; Ddc (Display Data Channel) - LG STUDIOWORKS 76I User Manual

Low Radiation Compliance (MPR II)

This monitor meets one of the strictest guidelines available today for
low radiation emissions, offering the user extra shielding and an anti-
static screen coating. These guidelines, set forth by a government
agency in Sweden, limit the amount of emission allowed in the
Extremely Low Frequency (ELF) and Very Low Frequency (VLF)
electromagnetic range.

Self Diagnostics

This monitor can sense when there is a possible problem present,
and informs you of this condition by presenting you with a Self
Diagnostics OSD. This OSD may pop up when it is On but no signal
is detected. In this case the message CHECK S/CABLE will be high
lighted, alerting you to check the signal cable connections.

DDC (Display Data Channel)

DDC is a communication channel over which the monitor
automatically informs the host system(PC) about its capabilities.This
monitor has three DDC functions; DDC1, DDC2B, DDC2AB. DDC1
and DDC2 carry out uni-directional communication between the PC
and the monitor. Under these situations, the PC sends display data to
the monitor but not commands to control the monitor servings.
DDC2AB has the function of bi-directional communication. For
example, the PC can fetch screen data from monitor and adjust the
screen with the PC keyboard.
NOTE: PC must support DDC functions to do this.
HELP Menu
The help menu, activated by selecting HELP Menu, gives you some
operating information about the monitor:
It is composed of the three sequential menus:
The first menu shows the total number of the preset, user mode and
current mode information, the second one shows the preset mode
data stored, and third one shows the user mode data stored.
Pressing the + key displays the next page.
Pressing the - key displays the preceding page.
13