Connecting The Display; Connecting The Stand Base - LG L1510S Install Manual

Connecting the Display

Before setting up the monitor, ensure that the power to the monitor, the
computer system, and other attached devices is turned off.

Connecting the stand base

1.
Align the hooks on the stand base with the matching slots in the base of
the monitor.
2.
Insert the hooks into slots.
Important
This illustration depicts the general model of connection. Your monitor may
differ from the items shown in the picture.
To Remove the Stand Base
- Do not force to remove the Stand Base, but remove the screws on the
back first for your safety.
- Once you connect the stand base, try not to disconnect it.
Do not carry the product upside down holding only
the stand base. The product may fall and get
damaged or injure your foot.
Stand Base
A3
Hook