4 channel long range wiegand radio receiver - up to 60m (7 pages)
Summary of Contents for Genie WRR-2
Page 1
2 Channel Wiegand Radio Receiver - Up to 30m WRR-2 Quick Start Guide Please read these instructions carefully before operating the unit and keep for further reference.
Page 2
Intro Section This Quick Start Guide is intended for experienced installing technicians. It is a basic reference to ensure all connections are properly made. Installation and wiring of systems must be in accordance with the National Electrical Code, ANSI/NFPA 70. The contents of this manual are subject to change without notice.
Quick Start Guide 2 Channel Wiegand Radio Receiver - Up to 30m The Genie WRR-2 is a 2 channel long range Wiegand radio receiver that allows interface with a wide range of electronic access control systems by complying with the Wiegand communication protocol.
Page 5
Quick Start Guide 2 Channel Wiegand Radio Receiver - Up to 30m 1.4 Cable Requirements 24 AWG minimum, multi-conductor stranded with an overall foil shield, for example Belden 9540 or similar. Per the SIA’s Wiegand specification, maximum cable length is 500 feet (152.4 m).
Page 6
Quick Start Guide 2 Channel Wiegand Radio Receiver - Up to 30m 1.11 6-Pin Terminal Block Refer to the information below for cabling to the Receiver: AD0: Button One, Wiegand Data 0, Channel A. AD1: Button One, Wiegand Data 1, Channel A. BD0: Button Two, Wiegand Data 0, Channel B.