Clifford 12.5X Owner's Manual page 27

The remote will indicate disarm notification with 2 beeps and 5
flashes of the
triggered, the remote control will send a diagnostic notification
as a reminder. These diagnostic notifications are:
1. If a sensor triggered the system, the remote will emit 4 quick
beeps and the LCD screen will indicate which sensor (5-
flashes) tripped the alarm.
2. If a switch (Zone 1, 3, 5, or 6) triggered the system, the
remote will emit 4 quick beeps and the LCD screen will
indicate which switch (5-flashes) tripped the alarm.
3. If the system was triggered so many times that NPC is active
the remote will emit the above notifications with 5 beeps
instead of 4.
22
icon. If disarming after the system has been
© 2006 directed electronics