iLIVE IAEBTG421 - Truly Wireless Earbuds Manual

Overview

1. Charging Contacts
2. Function Touch Pad
   Note: The Function Touch Pad is sensitive and must be touched or tapped to operate properly.
   • Tap and hold either earbud for 3 seconds to power ON (5 seconds to power OFF).
   • Tap to turn volume up (RIGHT).
   • Tap to turn volume down (LEFT).
   • Double tap to play/pause music.
   • Quickly tap 3 times to skip to next track (RIGHT ).
   • Quickly tap 3 times to play previous tracks (LEFT).
   • Tap either earbud once to answer/end phone calls.
   • Tap and hold either earbud for 2 seconds to reject incoming calls.
   • Tap and hold for 2 seconds to activate Voice Assistant (RIGHT).
   • Press and hold for 2 seconds to switch modes between: Game Mode and Music Mode (LEFT).
3. Microphone
4. Pairing Indicator LED
   NOTE: Each earbud must be powered on separately

Charging the Earbuds

1. Open the cover and place the earbuds on the charging contacts. Be sure to match the left and right earbuds with the correct docking station in the case. Close the case to begin charging.
   
2. When charging, the Case Indicator LEDs on the front of the case will turn on. When charging is complete, the indicator LEDs will turn off.
   

Charging the Case

The earbuds have a total battery life of approximately 7.5 hours at 50% volume. To charge the case, use the USB-C to USB cable (included), to connect to the USB port of a powered on computer or USB power adaptor (not included). When the case is charging the Power Indicator LED will flash green. When fully charged the LED will turn solid green. The total charge time is approximately 2.5 hours.

Pairing Bluetooth

Note: When the case is opened the earbuds will power on, link and enter into pairing mode. You can power on a single earbud to use as a single unit if you wish.

1. With the earbuds linked, you can now connect to your Bluetooth device. The LED indicator on the right earbud will continue flashing green, indicating it is ready to pair to a Bluetooth device.
2. On your Bluetooth device, access Bluetooth Settings and search for nearby devices. Select IAEBTG421 when it is discovered. When successfully connected to your Bluetooth device, the LED indicator on both of the earbuds will flash green, slowly and a voice prompt will announce the Bluetooth connection.
3. Audio played through the connected Bluetooth device will now be heard through both earbuds. Use the controls on the connected device to play audio and adjust volume.

PLEASE NOTE: Due to the nature of truly wireless earbuds, you may experience slight interruptions with your audio in areas with multiple 2.4Ghz bands or in high wireless traffic areas.

Speakerphone

• To accept or end a phone call, tap the earbuds.
• You can also use the controls on the connected phone to handle phone functions.

Charging Case & Auto-On Feature

While the case power is ON:

• Placing the earbuds in the charging case and closing the case lid will automatically power them off and begin charging.
• Opening the case will automatically power them on, link them, and connect to the last used Bluetooth device (earbuds must have been linked and connected to a Bluetooth device already).

Game Mode

• Gaming mode optimizes the earbuds for gaming by activating Environmental Noise Cancellation (ENC).
• The earbuds will also lower latency so there is less lag time when communicating.
• In order to optimize for gaming, the effective connection range between the earbuds and the Bluetooth device is reduced to support lower latency.

Music Mode

• Music mode will optimize the earbuds for listening to music. This will extend effective connection range and overall quality of the audio.

Customer Support

Customer Service: 1-888-999-4215
Email Support: prodinfo@dpiinc.com
Email Parts: partsinfo@dpiinc.com

For Warranty Information and the most up-to-date version of this User's Guide, go to www.iLiveElectronics.com

Copyright © 2021 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective owners. Specifications are subject to change without notice.

FCC Warnings

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Additional Warnings

• 
  To prevent fire or shock hazards, do not expose this unit to rain or moisture.
• 
  Where the mains plug or appliance coupler is used as the disconnect device, such disconnect device shall remain readily operable.
• Lithium batteries, like all rechargeable batteries, are recyclable and should be recycled or disposed of according to state and local guidelines. They should never be disposed of in normal household waste, and they should never be incinerated, as they might explode. Contact your local government for disposal or recycling practices in your area.
• This product meets and complies with all Federal regulations.
• To avoid hearing damage, make sure that the volume on your music player is turned down before connecting your headphones. After placing headphones in/on your ears, gradually turn up the volume until you reach a comfortable listening level.

This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
This product meets and complies with required Federal product guidelines.