iLive v2714-01 User Manual

Truly Wire Free Earbuds
User's Guide for Model IAEBT411 v2714-01
Charging Contacts
Note: The Function Touch Pad is sensitive and must be touched or
Tap and hold for 5 seconds to power ON/OFF.
Tap and hold for 2 seconds to reject incoming calls.
Tap and hold for 2 seconds to activate Voice Assistant (LEFT).
Press and hold for 3 seconds to switch modes between: Normal, Transparent, and ANC (RIGHT).
Quickly tap twice to skip to next track (RIGHT ).
Quickly tap twice to play previous tracks (LEFT).
Quickly tap three times to turn volume up (RIGHT).
Quickly tap three times to turn volume down (LEFT).
Charging Contacts
Power Indicator
LED
Function Touch Pad
tapped to operate properly.
Tap to play/pause music.
Tap to answer/end phone calls.
NOTE: Each earbud must
be powered on separately.
Charging the Earbuds
1. Open the cover and place the earbuds on the charging contacts.
Be sure to match the left and right earbuds with the correct
docking station in the case.
2. When charging, the Power Indicator LED on the bottom of the
case will turn blue. When charging is complete, the indicator LED
will turn off.
3. Earbud Indicator LED will turn red when charging. When fully
charged, the LEDs will turn off.
Earbud Indicator LED/Microphone
Red when charging.
Lights off when fully charged.
Charging the Case
The earbuds have a total battery life of
approximately 5 hours at 50% volume with
ANC off. To charge the case, use the USB-C
to USB cable (included), to connect to the
USB port of a powered on computer or
USB power adaptor (not included). When
the case is charging the Power Indicator
LED will flash red. When fully charged the
LED will turn red. The total charge time is
approximately 2 hours.