Philips 22BDL7319L User Manual page 20

Step 7. (for 90° angle installation)
1
Tighten the screw bolts (
LED display (if necessary). Firmly tighten the screw bolts to secure the cabinets to the mounting bracket (
Step 8. (for 180° angle installation)
For 180° angle installation, appropriate clearance between two cabinets must be considered. Follow the installation steps
below.
1
Tighten the screw bolts (
Use the feeler gauges to ensure accurate gap is reserved between the cascaded cabinets. Insert 2 pieces of 1mm feeler gauge
into the gap between two parts as illustrated below (
The feeler gauges are not provided with the product.
Adjust the flatness of the LED display (if necessary). Firmly tighten the screw bolts to secure the cabinets to the mounting
3
bracket ( ).
After installation is complete, pull out the feeler gauges.
For installation of two types of cabinets with different side angles (e.g., xxBDL7319L and xxBDL7219L), use the 0.5mm feeler
gauge to keep clearance between two cabinets.
). Repeat the above steps until all cabinets are mounted onto the bracket. Adjust the flatness of the
). Repeat the above steps until all cabinets are mounted onto the bracket.
2
).
2
0.5 mm
1mm 1 mm
9
2
1
3
22BDL7319L
).