1. Manuals
  2. Brands
  3. Philips Manuals
  4. Monitor
  5. 27BDL61 L Series
  6. User manual

Philips 27BDL61 L Series User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Professional
Display Solutions
L Line
27BDL61xxL
User Manual (English)
www.philips.com/welcome

Advertisement

Table of Contents
loading

Related Manuals for Philips 27BDL61 L Series

Summary of Contents for Philips 27BDL61 L Series

  • Page 1 Professional Display Solutions L Line 27BDL61xxL User Manual (English) www.philips.com/welcome...

  • Page 2: Table Of Contents

    27BDL61xxL Table Of Contents Safety Instructions ............1 Preparations ..............10 2.1. Unpacking ............10 2.2. Package Contents ..........10 2.3. Holding the cabinet ........11 2.4. Installation Notes ..........11 Product overview ............12 3.1. Front view ............12 3.2. Rear view ............12 3.3. Side view .............12 3.4.

  • Page 3: Safety Instructions

    When turning off the display by detaching the power cord, wait 6 seconds before re-attaching the power cord for normal operation. • Ensure the use of an approved power cord provided by Philips at all times. If your power cord is missing, please contact your local service center. • Do not subject the display to severe vibration or high impact conditions during operation.
  • Page 4 27BDL61xxL Environmental absolute ratings Item Min. Max. Unit Storage temperature °C Operation temperature °C Storage humidity % RH Operating humidity % RH • LED display temperature need to be 25 degrees Celsius at all time for better luminance performance. • Only the lifetime of the display stated in this specification is guaranteed if the display is used under the proper operation conditions.
  • Page 5 27BDL61xxL Read and follow these instructions when connecting and using your display: • Unplug the display if you are not going to use it for an extensive period of time. • Unplug the display if you need to clean it with a slightly damp cloth. The screen many be wiped with a dry cloth when the power is off. However, never use alcohol, solvents or ammonia-based liquids.
  • Page 6 27BDL61xxL Polish Center for Testing and Certification Notice The equipment should draw power from a socket with an attached protection circuit (a three-prong socket). All equipment that works together (computer, display, printer, and so on) should have the same power supply source. The phasing conductor of the room’s electrical installation should have a reserve short-circuit protection device in the form of a fuse with a nominal value no larger than 16 amperes (A).
  • Page 7 27BDL61xxL Information for U.K. only WARNING - THIS APPLIANCE MUST BE EARTHED. Important: This apparatus is supplied with an approved moulded 13A plug. To change a fuse in this type of plug proceed as follows:+ 1. Remove fuse cover and fuse. 2.
  • Page 8 27BDL61xxL China RoHS 根据中国大陆《电器电子产品有害物质限制使用管理办法》，以下部分列出了本产品中可能包含的有害 物质的名称和含量。 有害物质 部件名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb) (Hg) (Cd) (Cr (VI)) (PBB) (PBDE) 铁框 发光二极管 电路板组件* 电源线 其他线材 本表格依据SJ/T 11364 的规定编制。 电路板组件包括印刷电路板及其构成的零部件，如电阻、电容、集成电路、连接器等。 表示该有害物质在该部件所有均质材料中的含量均在 GB/T 26572规定的限量要求以下。 表示该有害物质至少在该部件的某一均质材料中的含量超出GB/T 26572规定的限量要求。 上表中打“X”的部件，应功能需要，部分有害物质含量超出GB/T 26572规定的限量要求，但符合欧盟 RoHS法规要求（属于豁免部分）。 备注：上表仅做为范例，实际标示时应依照各产品的实际部件及所含有害物质进行标示。 环保使用期限 此标识指期限 ( 十年 )，电子电气产品中含有的有害物质在正常使用的条件下不会发生外泄或突变，电 子电气产品用户使用该电子电气产品不会对环境造成严重污染或对其人身、财产造成严重损害的期限。...
  • Page 9 Your new Public Information Display contains materials that can be recycled and reused. Specialized companies can recycle your product to increase the amount of reusable materials and to minimize the amount to be disposed of. Please find out about the local regulations on how to dispose of your old display from your local Philips dealer. (For customers in Canada and U.S.A.) This product may contain lead and/or mercury.
  • Page 10 For more information about E -waste please visit http://www.india.philips.com/about/sustainability/recycling/index.page and to know where you can drop off your waste equipment for recycling in India please contact on below given contact details. Helpline number: 1800-425-6396 (Monday to Saturday, 9 a.m. to 5:30 pm) E-mail: india.callcentre@tpv-tech.com...
  • Page 11 27BDL61xxL Information for EAC Month and year of manufacturing please refer information in Rating label. ООО “Профтехника” Name and location of manufacturer Адрес: 3-й Проезд Марьиной рощи, 40/1 офис 1. Москва, 127018, Россия Наименование организации: ООО “Профтехника” Адрес: 3-й Проезд Марьиной рощи, 40/1 офис 1. Москва, 127018, Россия Importer and information Контактное лицо: Наталья Астафьева, +7 495 640 20 20 nat@profdisplays.ru Cleaning If the LED display/cabinet becomes dusty, use an air blower which can produce air flow to blow away dust. Cautions when cleaning the display: Do not use a wet cloth to clean the LED display.

  • Page 12: Preparations

    27BDL61xxL Preparations 2.1. Unpacking Warning: To prevent damage to the LED panel, wear anti-static gloves before installing/touching the display. After unpacking, do not place the display vertically on the floor, an accident such as fall may be caused. 1. Use a pair of scissors to cut sealing tape on the cardboard box. 2. Carefully take the cabinet and accessories out of the cardboard box. 3.

  • Page 13: Holding The Cabinet

    27BDL61xxL 2.3. Holding the cabinet Warning: To prevent damage to the LED, do NOT touch the edge of each LED module when holding the cabinet by hand. Refer to the illustration below for the recommended manner of holding a cabinet. 2.4.

  • Page 14: Product Overview

    27BDL61xxL Product overview 3.1. Front view 3.2. Rear view 3.3. Side view Left side Right side 3.4. Top view 3.5. Bottom view Component Component POWER IN connector DATA connector POWER OUT connector CHECK button The Data connector ( ) is an RJ45 connector, but it cannot be connected with a network switch or common computer networking device as it is not compatible.

  • Page 15: Preparation

    27BDL61xxL Preparation 4.1. Testing the cabinet 1. Power on the product by connecting the power cable from the cabinet to the power outlet. 2. Press the CHECK button on the back of each cabinet to check if the product can operate normally. 3.

  • Page 16: Connection

    27BDL61xxL Connection 5.1. Connecting the signal and power cables LAN cable LED display controller * Optional accessories ** Power plug types vary by country/region. Cautions Connection is allowed up to 8 cabinets when the 110 VAC power supply is used. Connection is allowed up to 16 cabinets when the 220 VAC power supply is used.

  • Page 17: Installing The Modules

    27BDL61xxL Installing the modules When installing the modules, refer to the instruction and installation order specified below. Note that screen output may not be displayed properly if instructions are not followed. Every cabinet has a serial number supplied and this serial number is located on the label that is affixed to the interior of the cabinet. Whereas one label can be found inside each module indicating the serial number of the module. This label provides important information to uniquely identify every single module, as it allows you to easily locate the correct module that connects to the cabinet. When installing the module onto the cabinet, make sure the serial number on the module label matches that of the cabinet label.
  • Page 18 27BDL61xxL The 16th digit of the serial number corresponds to the position code of the module. Follow the ascending alphabetical order to install the module to correct position. Refer to the diagram below on the proper order of installing the modules. To install the module to the hub board, the flat cable that connects between them has to be properly wired. One end of the flat cable is already attached to the hub board, use the other end to connect it to the module.

  • Page 19: Dehumidification Function

    27BDL61xxL Dehumidification function Purpose of dehumidification in LED display Internal parts and elements tend to corrode during storage when the LED display is left unused for a long period of time in a humid environment. In particular when moisture gets into the diode, it may cause blurred screen or defective LED. As a result, the dehumidification has an important role to play in the performance and lifespan of LED display.
  • Page 20 27BDL61xxL 3. Enter the password admin or 666888 in the main menu. See Figure 1-3. Figure 1-3 4. A dialog box will then appear as shown in Figure 1-4. Select the Communication port for operation. Click Reconnect if you need to reconnect the LED display controller. Figure 1-4...
  • Page 21 27BDL61xxL 5. Inform your supplier the model of the LED display controller you are using, a corresponding firmware will then be provided to you. Click Browse to search the firmware file provided by your supplier. See Figure 1-5. Figure 1-5 6. Click Update to start updating. See Figure 1-6. Figure 1-6...
  • Page 22 27BDL61xxL 7. After the update is complete, click OK. See Figure 1-7. Figure 1-7...
  • Page 23 27BDL61xxL 8. Verification In hardware program version information, click Refresh (default value is Refresh All). Verification process starts by checking the version numbers between the LED display controller and the one with dehumidification. If the version numbers are consistent, it indicates that firmware upgrade is successful. See Figure 1-8. Figure 1-8...

  • Page 24: Configuring Dehumidification Settings

    27BDL61xxL 7.3. Configuring dehumidification settings When the LED display is operated normally over a period of time, follow the steps below before you turn the display off: 1. Run the program Nova LCT V.5.4.3 Plus. 2. After screen configuration is complete, click Brightness. See Figure 2-1. Figure 2-1 3. In brightness adjustment screen, click the Enable Dry mode checkbox. See Figure 2-2. Figure 2-2...
  • Page 25 27BDL61xxL 4. Set dehumidification time in the Duration field. Refer to Table 1 for suggested dehumidification duration. Figure 2-3 5. Click Send and Save to HW, then check that brightness is set successfully in the information box at the bottom of the screen. Figure 2-4 6. To make sure the dehumidification function is initiated, wait 1 minute before you exit the brightness setting menu.

  • Page 26: Activating Dehumidification Function

    27BDL61xxL 7.4. Activating Dehumidification function 1. Turn off the LED display and power off the LED display controller. 2. When using the LED display, turn on the LED display controller and the LED display. * You can notice that, according to the dehumidification time you set, the brightness of your LED display changes from dark to bright gradually. When the highest brightness level is reached, the brightness returns to the default value defined by user automatically. 3. Whenever you turn on the LED display, the dehumidification function starts working automatically after the LED display controller is activated. 7.5. Cancelling Dehumidification function 1. In the brightness adjustment screen, deselect the Enable Dry mode checkbox. 2.

  • Page 27: Using The Led Display Controller

    27BDL61xxL Using the LED display controller The LED display controller is a device served for managing any type of video and data sources for any screen configuration. Visit Novastar website to learn more about Novastar’s LED display controller and select the one that suit your needs according to the resolution and screen configuration of your display. https://www.novastar.tech/products/ To download the Novastar software and user’s guide, click on the following link: https://www.novastar.tech/downloads/controller/...

  • Page 28: Appendices

    (e.g. in the intended environment). For these product categories, a partner company of Philips is the warrantor of the product. Please check the documentation supplied with your product.
  • Page 29 Warranty period for PHILIPS signage display is listed as below, for areas not covered in this table, please follow their warranty statement. Standard warranty period for PHILIPS signage display is listed as below, for areas not covered in this table, please follow the local warranty statement.

  • Page 30: Appendix B. Troubleshooting

    27BDL61xxL Appendix B. Troubleshooting Frequently asked questions and common problems that may occur while using the system are explained in this section. Observe the following table containing a list of symptoms and the actions to take to solve the problems. If a problem persists after performing the following actions, contact technical support. Symptom Possible cause and corrective action •...

  • Page 31: Appendix C. Dew Point Vs. Relative Humidity

    27BDL61xxL Appendix C. Dew point VS. Relative Humidity The table below explains the relationship between temperature/relative humidity and dew point. Celsius (°C) Relative Humidity (%) Dew point (°C) -43.87 -37.24 -33.15 -30.15 -27.76 -25.77 -24.06 -22.56 Celsius (°C) Relative Humidity (%) Dew point (°C) -35.94 -28.76...

  • Page 32: Appendix D. Optional Components/Accessories

    27BDL61xxL Appendix D. Optional Components/Accessories If you need to purchase the components or accessories listed below, please contact your local service center for support. Commercial description 27BDL6112L/00 LED Panel/Cabinet 6112-series, P1.266mm Copper 27BDL6115L/00 LED Panel/Cabinet 6115-series, P1.583mm Copper 27BDL6119L/00 LED Panel/Cabinet 6119-series, P1.9mm Copper CRD16112/00 6112-series, P1.266mm Copper CRD16115/00...
  • Page 33 27BDL61xxL Commercial description CRD20005/00 Controller Novastar VX4U (EU) CRD20005/17 Controller Novastar VX4U (US) CRD20005/05 Controller Novastar VX4U (HK) CRD20005/75 Controller Novastar VX4U (CN/AUS) CRD20005/67 Controller Novastar VX4U (THAI) CRD20006/00 Controller Novastar VX6S (EU) CRD20006/17 Controller Novastar VX6S (US) CRD20006/05 Controller Novastar VX6S (HK) CRD20006/75 Controller Novastar VX6S (CN/AUS) CRD20006/67...

  • Page 34: Appendix E. Technical Specifications

    27BDL61xxL Appendix E. Technical Specifications Picture/Display 27BDL6112L Max. brightness (nits) ±700nits Color Temperature (K) default 6500±500 Color Temperature (K) adjust range 4000~9500 (by software) Viewing Angle (°) H/V 160/160 Brightness Uniformity ≥97% Transparent rate(%) Color Uniformity ±0.012Cx,Cy Color coordinates 0.313, 0.325 (±0.012Cx,Cy) Max.
  • Page 35 27BDL61xxL Cabinet Cabinet Size W/O Module (WxHxD in mm) 608 x 342 x 59 Side angle (degree) Cabinet Size (inch) 27.5" Cabinet Resolution (W×H in pixels) 480 x 270 Receiving card brand Novastar Receiving card type A7S Plus *1 Weight (W/O packing and accessories) 5.78Kg (±289g) Cabinet pixels (Dot) 129600...
  • Page 36 27BDL61xxL Picture/Display 27BDL6115L Max. brightness (nits) ±700nits Color Temperature (K) default 6500±500 Color Temperature (K) adjust range 4000~9500 (by software) Viewing Angle (°) H/V 160/160 Brightness Uniformity ≥97% Transparent rate(%) Color Uniformity ±0.012Cx,Cy Color coordinates 0.313, 0.325 (±0.012Cx,Cy) Max. contrast ratio 3000:1 Calibration (Brightness/Color) Color and Brightness...
  • Page 37 27BDL61xxL Cabinet Cabinet Size W/O Module (WxHxD in mm) 608 x 342 x 59 Side angle (degree) Cabinet Size (inch) 27.5" Cabinet Resolution (W×H in pixels) 384 x 216 Receiving card brand Novastar Receiving card type A5S Plus *1 Weight (W/O packing and accessories) 5.66Kg (±283g) Cabinet pixels (Dot) 82944...
  • Page 38 27BDL61xxL Picture/Display 27BDL6119L Max. brightness (nits) ±700nits Color Temperature (K) default 6500±500 Color Temperature (K) adjust range 4000~9500 (by software) Viewing Angle (°) H/V 160/160 Brightness Uniformity ≥97% Transparent rate(%) Color Uniformity ±0.012Cx,Cy Color coordinates 0.313, 0.325 (±0.012Cx,Cy) Max. contrast ratio 3000:1 Calibration (Brightness/Color) Color and Brightness...
  • Page 39 27BDL61xxL Cabinet Cabinet Size W/O Module (WxHxD in mm) 608 x 342 x 59 Side angle (degree) Cabinet Size (inch) 27.5" Cabinet Resolution (W×H in pixels) 320 x 180 Receiving card brand Novastar Receiving card type A5S Plus *1 Weight (W/O packing and accessories) 5.81Kg (±291g) Cabinet pixels (Dot) 57600...

  • Page 40: Appendix F. Magnet Tension

    27BDL61xxL Appendix F. Magnet tension 1. Each module of 27BDL6xxxL uses 13 N35 NdFEB magnets. After measurement, the tensile force of N35 NdFEB magnets at various temperatures is as follows:   Temperature The tension value of each magnet (Kg) 0.47 0.47 0.15 Tension value per module (Kg) 6.11 6.11 1.95...
  • Page 41 This product has been manufactured by and is sold under the responsibility of Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license.

This manual is also suitable for:

L seriesP1.9 copper 6115 series27bdl6119l/00

Table of Contents