Epson Mobilink TM-P20II Technical Reference Manual page 64

Auto power off
• Enable (20 minutes)
• Disable (initial setting)
• Using the TM Utility, TM-P20II Utilirty, or the ESC/POS command, it can be set in the range of 0
(disabled) to 60 minutes in 1-minute increments.
• When the USB interface is connected, this setting is disabled (no auto power off ).
• For details on the auto power off function, see
Paper Position at Power On
Function Select
• Enabled
• Disabled (initial setting)
Position Select
• Cut Position
• Top Position (initial setting)
This menu allows you to set the paper position immediately after closing the roll paper cover,
resetting the printer, or turning on the printer.
Resizing method for graphic data scaling
Select the resizing method for graphic data scaling.
• None (initial setting)
• Auto
• Manual
Algorithm
• Simple thinning
• Nearest neighbor
• Bilinear
• Bicubic
Scaling factor for manual adjustment
50 to 200%
Batch rotate print (Upside Down)
When this function is enabled, each receipt is rotated 180 degrees and printed.
• Enable
• Disable (initial setting)
Chapter 4 Advanced Usage
"Auto Power-Off" on page 24.
64