Westinghouse TECO PA7300 Series Quick Start Manual page 8

__________________________________________________________________
Appendix A-
Changing display to read output speed in percent (%) of full speed.
The display is factory defaulted to show the inverter output frequency in Hz. If desired, the
display can be changed to show the output frequency as a percentage of full speed. To do this
parameter Cn-20 must be changed from (00000) to (00001) as follows:
The display should read
Press the
Key; the display should read
last digit position and then press the
Press the
Key to save.
Appendix B -
Removing the LCD Digital Operator and Inverter Cover(s)
_______________________________________________________________
PA7300 Inverter Pump Quick Start Manual
press the
Key, and then the
Press the
Key; The display should read
Press the
to return to the main display.
Key 4 times;
Key until display shows
0
Press the
TECO – Westinghouse Motor Company
Key and scroll to the
1
8