FRUs and compatibility matrixes
For transceiver modules or cables compatible with the cards, see H3C S12500X-AF Switch Series
Cards and Transceiver Modules Compatibility Matrixes.
MPUs
The switch uses an MPU for control and management. You can install one MPU or two MPUs for
redundancy on the switch. Do not install MPUs of different models on the same switch.
Table 1 MPU ordering guide
Switch model
•
S12516X-AF
•
S12508X-AF
S12512X-AF
S12504X-AF
S12502X-AF
Table 2 MPU specifications (1)
Item
Processor
SDRAM
Flash
NVRAM
Connector
type
Ports
LSXM1SUPA1
MIPS64 (Quad Core) @ 1.2 GHz
8GB DDR3 SDRAM (two
DIMM slots)
1 GB (NAND flash)
512 KB
•
RJ-45
•
USB (Type A)
•
One console port
•
One
10/100/1000BASE-T
port for management
and upgrade
•
One USB port
(USB2.0, host port)
Available MPUs
•
LSXM1SUPA1
•
LSXM1SUPB1
•
LSXM1SUPH1
•
LSXM2SUPT1
•
LSXM1SUPE1
•
LSXM1SUPB1
•
LSXM1SUPH1
•
LSXM1SUPE1
•
LSXM1SUP04B1
•
LSXM1SUP04H1
LSXM1SUP02B1
LSXM1SUPB1/LSXM1SUP
04B1
8GB DDR3 SDRAM (two
DIMM slots)
•
RJ-45
•
LC
•
USB (Type A)
•
One console port
•
Two GE SFP ports for
management and
upgrade
•
Two 10/100/1000BASE-T
ports for management
and upgrade
•
One USB port (USB2.0,
host port)
1
LSXM1SUP02B1
MIPS64 (Dual Core) @ 1.0
GHz
8GB DDR3 SDRAM (one
DIMM slot)
•
RJ-45
•
LC
•
USB (Type A)
•
One console port
•
One SFP port for
management and
upgrade
•
One
10/100/1000BASE-T
port for management
and upgrade
•
One USB port (USB2.0,
host port)