Appliance settings
en
Dosing and adding detergent:
Pull out the detergent drawer.
1.
Add the correct dosage to
2.
compartment v u depending on:
– Soiling
– Water hardness (ask your water
supply company)
– The amount of laundry
– The manufacturer's instructions
Close the detergent drawer.
3.
Q
Appliance settings
You can change the following settings:
A p p l i a n c e s e t t i n g s
The volume of the buttons and the
■
information signals (e.g. at the end
of the programme)
Select/deselect the appliance's
■
automatic switch-off function
~ Page 8
Switch the drum-care information
■
signal on/off (depending on the
model). From ~ Page 16 onwards
You will need to activate the setting
mode in order to change these settings.
32
Activating the setting mode
Press the # button.
1.
The appliance is switched on and
the Cottons programme is shown at
position 1.
Press the Temperature button and,
2.
at the same time, turn the
programme selector clockwise to
position 2. Release the button.
The setting mode is activated and the
preset volume for the information
signals appears in the display panel.
You can now change the settings:
Changing the signal volume
Use the Ready in + or - button to
change the following settings at the
corresponding programme selector
positions:
2: The volume of the information
■
signals and/or
3: The volume of the button signals.
■
Exit setting mode or:
Selecting/deselecting the
appliance automatic switch-
off
With the programme selector in position
4, press the Ready in + or - button to
turn the automatic switch-off function on
or off.
Exit setting mode or:
0 = off,
1 = quiet,
2 = medium,
3 = loud,
4 = very loud