Table of Contents
Advertisement
2.0
Drive specifications
Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal power. For convenience, the
phrases the drive and this drive are used throughout this manual to indicate the following drive models:
5xxE Standard models
ST10000VE001
2.1
Specification summary tables
The specifications listed in the following tables are for quick reference. For details on specification measurement or definition, see the
appropriate section of this manual.
Table 1 Drive specifications summary
Drive specification
Formatted (512 bytes/sector)
Guaranteed sectors
Heads
Discs
Bytes per logical sector
Bytes per physical sector
Recording density, KBPI (Kb/in max)
Track density, KTPI (ktracks/in, 0 skew)
2
Areal density, (Gb/in
, @ 0 skew mid-disk)
Spindle speed (RPM)
Internal data transfer rate (Mb/s max)
Sustained data transfer rate OD (MiB/s max)
I/O data-transfer rate (MB/s max)
ATA data-transfer modes supported
Cache buffer
Weight: (maximum)
Average latency
Power-on to ready (sec) (typ/max)
Standby to ready (sec) (typ/max)
Startup current (typical) 12V (peak)
Voltage tolerance (including noise)
Operating ambient temperature (min °C)
Operating temperature (max °C)
Non-Operating temperature
Temperature gradient (°C per hour max)
*
Relative humidity
Relative humidity gradient
Altitude, operating
Seagate SkyHawk AI Serial ATA Product Manual, Rev. C
#
**
*
*
ST10000VE001
10TB
(see
Section
4096
2499
1215
7200
2169
234 (245MB/s max)
PIO modes 0–4
Multiword DMA modes 0–2
Ultra DMA modes 0–6
256MB (262,144KB)
720g (1.587 lb)
4.16ms
23/30
23/30
2.0A
5V ±5%
12V ±10%
0°C (Ambient)
65°C (Drive Reported Temperature)
–40° to 70°C (Ambient Temperature, see sections
20°C (operating)
20°C (nonoperating)
5% to 95% (operating)
5% to 95% (nonoperating)
20% per hour max
–304.8 m to 3,048 m
(–1000 ft to 10,000+ ft)
2.2)
10
5
512
487
600
†
2.6.1
and 2.10)
6
Advertisement
Table of Contents
