Table of Contents
Advertisement
1.2 Mounting and installation
Wall installation
With wall bracket H1 (included as
standard with room thermostats type
TRM). For wall installation of TX and
TAM, H1 bracket needs to be ordered
separately. This is valid for all versions
with housing 2..., 3..., 5..., and 7... (Ex).
Fig. 1.
MU2B-0375GE51 R0211A
Wall installation 2...
Fasten holding bracket (1) horizontal-
ly on wall by means of screws and
plugs (6 mm diameter)
Fasten terminal plate (3) by means of
2 screws M4 on the reverse side of
the switching unit (do not tighten –
maintain approx. 2 mm distance
between casing and terminal plate).
Hang casing on the bracket and
clamp it with two screws M4.
The thermostats can also be fixed directly
by means of 2 screws (4 mm diameter)
on a flat surface (without wall bracket
H1).
1. Basic equipment
37
Advertisement
Table of Contents
