Advanced Appliqués; Sending Multiple Patterns From The Cutting Machine To The Embroidery Machine - Brother Innov-IS XP Series Operation Manual

Advanced Appliqués
A pattern from the cutting machine can be sent to the embroidery machine for sewing an appliqué.
a Send a built-in pattern from the cutting machine to the embroidery machine.
b Create an embroidery pattern on the embroidery machine, and then apply appliqué settings to a part of the pattern.
c Send the embroidery pattern to the cutting machine.
d Cut the appliqué fabric with the cutting machine.
e Finish the appliqué with the embroidery machine.
Note
• For details on the basic procedure, refer to "Basic Appliqués" on page 14.
Sending Multiple Patterns from the Cutting
Machine to the Embroidery Machine
a
Touch in the home screen, and then touch the [My
Connection] key.
b
Touch the [Send] key.
c
Touch the [Pattern] key.
d
Select the pattern, and then touch the [OK] key.
e
Select the first part to be sent to the embroidery machine,
and then touch the [OK] key.
* For this example, select part B (strawberry body).
f
Touch the [Set] key.
g
Touch the [Transfer] key.
* For details, refer to "Sending a Pattern from the Cutting
Machine to the Embroidery Machine" on page 6.
h
Import the pattern (sent from the cutting machine) into
the embroidery machine.
* Refer to "Importing the Pattern (Sent from the Cutting
Machine) into the Embroidery Machine" on page 7.
19