Table of Contents
Advertisement
o If either seal is not adhering to the cabinet properly, then you
should either:-
1. Use a warm damp cloth and manipulate the seal until it does
adhere to the cabinet properly, all the way around the door.
or
2. Use a hair dryer on its lowest heat setting and lightly heat the
areas of the door seal that are not adhering correctly. Th
heat will make the seal more pliable and this will allow you to
manipulate
IMPORTANT: DO NOT HEAT THE DOOR SEAL ON ANYTHING BUT
THE LO
WEST HEAT SETTING, OR HEAT THE SEAL FOR A LONG
PE
RIOD OF TIME. OTHERWISE DAMAGE MAY BE CAUSED TO
THE DOOR SEAL, WHICH WOULD NOT BE RECTIFIED UNDER
T
HE GUARANTEE FREE OF CHARGE.
IMPORTANT: WHEN YOU HAVE REVERSED THE DOORS OF THE
APPLIANCE. AS YOU HAVE PLACED THE APPLIANCE ON ITS
SIDE, YOU MUST WAIT FOR 8 HOURS BEFORE SWITCHING THE
APPLIANCE BACK ON.
Aperture dimensions and ventilation requirements
the seal into the correct position.
Height-
D
W
1) The
appliance
should be:
1780 mm
epth-
550 mm
idth-
570 mm
e
a
perture
29
Advertisement
Table of Contents
