Dyson Radix Cyclone 8 DC07 brush control User Manual page 3

DCO7
Ready-to-go hose release
On/off switch
Cyclone release catch
Bin emptying trigger
Filter release catch
Filter housing
Shroud release catch
Shroud
Airway inspection valve
Valve release clips
Soleplate
Floortool
Stair tool
Brush tool
Crevice tool
Wand cap
Upper cable winder
Wand
Assembling DCO7
1
Wand release button
Hose
2
Lower cable winder
U-bend release clip
Airway inspection
(U-bend)
Place the machine on its
side, remove the u-bend.
Slide hose into runners at
back of machine and
push down until it clicks.
Click the u-bend back
into place.
Press wand release button
and slide wand down into
hose.
2
1