Gigabyte X570 AORUS ELITE User Manual page 28

& SMT Mode
Allows you to enable or disable the CPU Simultaneous Multi-Threading technology. This feature only works
for operating systems that support multi-processor mode. Auto lets the BIOS automatically congure this
setting. (Deault: Auto)
& AMD CPU fTPM
Enables or disables the TPM 2.0 unction integrated in the AMD CPU. (Deault: Disabled)
& Extreme Memory Profle (X.M.P.)
Allows the BIOS to read the SPD data on XMP memory module(s) to enhance memory perormance when
enabled.
Disables this unction. (Deault)
Disabled
Uses Prole 1 settings.
Prole1
Uses Prole 2 settings.
(Note)
Prole2
& XMP High Frequency Support
Allows you to select the compatibility level or high-requency memory. This item is congurable only
when Extreme Memory Profle (X.M.P.) is set to Profle1 or Profle2. (Deault: Auto)
& System Memory Multiplier
Allows you to set the system memory multiplier. Auto sets memory multiplier according to memory SPD
data. (Deault: Auto)
ƒ Advanced Memory Settings
ƒ Memory Subtimings
d Standard Timing Control, Advanced Timing Control, CAD Bus Setup Timing, CAD Bus
Drive Strength, Data Bus Confguration
These sections provide memory timing settings. Note: Your system may become unstable or fail to boot
after you make changes on the memory timings. If this occurs, please reset the board to default values by
loading optimized deaults or clearing the CMOS values.
ƒ SPD Info
Displays inormation on the installed memory.
& CPU Vcore/Dynamic Vcore(DVID)/VCORE SOC/Dynamic VCORE SOC(DVID)/CPU VDD18/
CPU VDDP/PM_1VSOC/PM_1V8/DRAM Voltage (CH A/B)
These items allow you to adjust the CPU Vcore and memory voltages.
ƒ Advanced Voltage Settings
This submenu allows you to congure Load-Line Calibration level, over-voltage protection level, over-current
protection level, and PWM frequency.
(Note) This item is present only when you install a CPU and a memory module that support this feature.
(Note)
(Note)
- 28 -