Lenovo ideapad 500S-13ISK Hardware Maintenance Manual page 48

ideapad 500S-13ISK Hardware Maintenance Manual
44
Figure 7. Removal steps of fan assembly and Heat Sink assembly (continued)
Unplug the fan connector in the direction shown by arrow 2. Remove the
screws 3.
Step Screw (quantity)
M2 × 4 mm, Phillips head, nylok-coated (3)
3
fan---mb---log up & fan---log up
When installing: Make sure that the connector is attached firmly.
Remove the fan in the direction shown by arrow 4. Be careful not to damage
the connector.
Color Torque
Black 1.0~1.5 kgf*cm