Solving Image Or Sound Problems - Epson CO-W01 User Manual

• Check to see if a button on the remote control is stuck down, causing it to enter sleep mode. Release
the button to wake the remote control up.
• Strong fluorescent lighting, direct sunlight, or infrared device signals may be interfering with the
projector's remote receivers. Dim the lights or move the projector away from the sun or interfering
equipment.
• If you lose the remote control, you can purchase another from an Epson parts distributor.
Parent topic:
Related references
Remote Control Operation
Where to Get Help (U.S. and Canada)
Where to Get Help (Latin America)
Projector Light Status
Projector Parts - Remote Control
Related tasks
Replacing the Remote Control Batteries

Solving Image or Sound Problems

Check the solutions in these sections if you have any problems with projected images or sound.
Solutions When No Image Appears
Solutions When "No Signal" Message Appears
Solutions When the Image is Not Rectangular
Solutions When the Image is Fuzzy or Blurry
Solutions When Only a Partial Image Appears
Solutions When the Image Contains Noise or Static
Solutions When the Image is Flickering
Solutions When the Image Brightness or Colors are Incorrect
Solutions When the Image is Upside Down
Solutions When Image is Incorrect Using the USB Display Function
Solutions to Sound Problems
Parent topic:
Solving Projector or Remote Control Operation Problems
Solving Problems
112