Pre-Installation Checklist - FujiFilm FinePix F410Z Owner's Manual

Table of Contents

Advertisement

INSTALLATION ON A Mac OS 8.6 TO 9.2
8. After you restart your Macintosh, the
"FinePixViewer installation completed"
message
appears.
Click
"Using
FinePixViewer" to view the basic
FinePixViewer functions.
9. To install Acrobat Reader, click "Install
Acrobat Reader".
✽ You should install Adobe Systems' Acrobat
Reader software to read the FinePixViewer User's
Guide ( PDF ) .
If you already have the latest version installed,
this step is not required.
10. Proceed with the installation as directed
by the on-screen instructions.
94
I To install Acrobat Reader later...
1. Double-click the "FinePix" CD-ROM to
open the CD - ROM window.
2. Double-click "FinePixViewer for Mac OS
8.6 - 9.x" → "Acrobat Reader" → "English"
folder.
3. Double-click "English Reader Installer".
4. Proceed with the installation as directed
by the on-screen instructions.
INSTALLATION ON A Mac OS X

Pre-installation Checklist

I Hardware and software requirements
To run this software, you must have the hardware and software described below. Check your system
before you begin the installation.
✽1
Compatible Mac
Power Macintosh G3
, PowerBook G3
Power Macintosh G4 Cube, or PowerBook G4
Operating System
Mac OS X (compatible with version 10.0.4, 10.2.3
RAM
192 MB minimum, 256MB recommeded
Amount required for installation : 70 MB minimum
Hard disk space
Amount required for operation : 300 MB minimum
( When ImageMixer VCD for FinePix is used : 2 GB or better )
800 × 600 pixels or better, at least 32,000 colors
Display
✽3
Internet connection
i To use the FinePix Internet Service or mail attachment function
An Internet connection and e-mail transmission software
i Connection speed : 56k or better recommended
✽1 Models with a USB port as a standard feature
✽2 AVI movies cannot be played back on version 10.0.4.
✽3 Required to use the FinePix Internet Service. The software can still be installed even if you do not have an Internet
connection.
N
N
NOTE
i Connect the camera directly to the Macintosh using the special USB cable. The software may not operate correctly if you
use an extension cable or connect the camera via a USB hub.
i Push the USB connector fully into the socket to ensure that it is securely connected. The software may not operate
correctly if the connection is faulty.
i Additional USB interface board is not guaranteed.
i If other applications will be used at the same time, allocate the additional amount required for those applications also.
✽1
, Power Macintosh G4, iMac, iBook,
✽2
)
5
95

Advertisement

Table of Contents
loading

Table of Contents