Philips DVP4060 User Manual page 3

LASER
Type
Wave length
Output Power
Beam divergence
'CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
DEFINITION TELEVISION SETS ARE FULLY
COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE
ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN
CASE OF 525 OR 625 PROGRESSIVE SCAN PICTURE
PROBLEMS, IT IS RECOMMENDED THAT THE USER
SWITCH THE CONNECTION TO THE 'STANDARD
DEFINITION' OUTPUT. IF THERE ARE QUESTIONS
REGARDING OUR TV SET COMPATIBILITY WITH THIS
MODEL 525p AND 625p DVD PLAYER, PLEASE
CONTACT OUR CUSTOMER SERVICE CENTER.'
CAUTION
Use of controls or adjustments or performance
of procedures other than herein may result in
hazardous radiation exposure or other unsafe
operation.
ATTENTION!
For Customer Use:
Read carefully the information located at the
bottom or rear of your DVD Video player and
enter below the Serial No. Retain this
information for future reference.
Model No. DVP4050 / DVP4060 /
DVP4080 / DVP4090
Serial No. _______________
dvp4080-4090_55_cover.indd 3 dvp4080-4090_55_cover.indd 3
Laser Safety
Semiconductor laser
This unit employs a laser. Due to possible
InGaAlP (DVD)
eye injury, only a qualifi ed service person
AIGaAs (CD)
should remove the cover or attempt to
658 nm (DVD)
service this device.
790 nm (CD)
7.0 mW (DVD)
10.0 mW (VCD/CD)
NOTE:
60 degrees
Pictures shown maybe different
between countries.
WARNING LOCATION: ON THE
BACKPLATE OF THE SET
NEVER MAKE OR CHANGE
CONNECTIONS WITH THE POWER
SWITCHED ON.
Specifi cations are subject to change without
notice. Trademarks are the property of
Koninklijke Philips Electronics N.V. or their
respective owners.
Manufactured under license from Dolby
Laboratories, Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
Windows Media and the Windows logo are
trademarks, or registered trademarks of Microsoft
Corporation in the United States and/or other
countries.
3
2007-09-14 3:23:00 PM 2007-09-14 3:23:00 PM