Saving Scan Settings As A Job; Deleting A Job - Minolta Dimage Scan 1.1 Software Manual

Saving scan settings as a Job

Frequently used scan settings can be saved.
With the settings to be saved in the scan setting window, click the
save Job button. The Job-registry dialog box will open.
Select the category in which to save the settings from the
drop-down menu.
Enter the Job name. Click OK to save the settings. The Job
file name can contain up to 24 characters. See page 20 to
load a Job.

Deleting a Job

A Job file can be deleted. Once deleted, it can not be recov-
ered.
Click the load Job button.
Select the Job file to be deleted from the Job categories in
the selection window. Use the following key(s) to delete the
selected file:
Windows
Macintosh
Click the cancel button to close the window.
Delete key
Command key + D
43