Adjusting Print Density; Configuring The Envelope Cassette - QMS PS 410 User Manual

Chapter 2
Configuring the Envelope Cassette Your printer receives the
necessary instructions to print on envelopes from your software
application driver. Read the printing section of your software
manual to see how your software supports envelope printing.
NOTE: If you have trouble with envelope jams, check the tray

Adjusting Print Density

Normally, your laser printer produces a rich, black image on the
paper. You may want to increase the print contrast setting as the
toner cartridge is used. The adjustment dial for print contrast is
inside the printer.
1. If the face-up output tray is installed, remove it. If the standard
tray is open, close it. Push up the release button on the front
to unlatch the front cover (fig. 2.8).
Fig. 2.8 Adjust Print Density
2 - 1 6
width adjuster to make sure it is not too tight and buckling
the envelopes. Also make sure the envelopes you use are
the correct size and type.
P r i n t e r U s e