Configuring Time Management - Honeywell MPA1 User Manual

30 |
MPA1 User Guide
The General section allows the user to:
Other fields in the Panel Configuration > Settings > General section are Firmware Version,
Reset, Panel Type, and Boot Time.

Configuring Time Management

In the Panel Configuration page, you can configure the following time-related settings:
•
Scroll down to the Time Management section.
Configuring the Current Panel Time
Between the Settings tab and the Host/Loop Communications tab, you can configure the
following for the current panel time:
Settings Tab
•
•
•
•
•
•
•
Host/Loop Communications Tab
•
www.honeywell.com/security
• Configure the panel's name
• View the active firmware version
• Reset the panel
• View the panel type
• View the last boot time of the panel
Set the current time.
Figure 2-12 Time Management Section
Specify the time format (12 hour/24 hour).
Set a new date.
Set a new time.
Set the geographic time zone.
Enable a time server, and then specify the IP address of the time server being used.
Specify the update interval.
Force a time synchronization between the panel and the time server.
Synchronizes the primary panel's time with the secondary panels.