QMS Magicolor 2 Desklaser User Manual page 109

To access the configuration menu, make sure the printer is idle (Idle displays in the
message window), then press the Online key to take the printer off line (the Online
indicator is not lighted), and finally press the Menu key.
For example, the following table shows how to use control panel keys to access the
printer configuration menu. Press the control panel keys in the order shown. The
printer responds by displaying a status message or configuration menu in the mes-
sage window.
Press this to...
key
Online/ Turn off the Online indicator and ready the printer for
Offline configuration.
Menu Access the configuration menu.
» Note: The printer must be off line and idle before you can access the configuration
menu.
Once you access the configuration menu, you use the control panel keys to move
through the menu. Use the following keys:
Press this key...
Menu
Select
For example, the instructions below show how to change the Energy Saver time inter-
val from 1 hour to 15 minutes.
Press this to...
key...
Online/ Turn off the Online indicator and ready the printer
Offline for configuration.
to...
Advance through the available menus: Energy saver, Language,
Internet address, Subnet mask, Router, and Eth. HW address
(Ethernet Hardware address). (Service, Board Test, and Test Page
have different functions. They are explained in chapter 8,
"Troubleshooting.")
Save an option.
The message window
reads...
Idle
Energy saver
The message window
reads...
Idle