Table of Contents
Advertisement
Adding text comments
Text comments can be added to the main image in the annotation window.
Click the desired area marquee from the tool bar (1),
Area marquees
or select the area-marquee option in the view menu.
Click and drag the mouse to place a red marquee over
the area to be described with a comment (2).
1
To change the defined area, click and drag the mouse
again; the previous marquee is canceled.
Click the text tab. Click on the comment text box to
place the cursor and enter a comment (3). Up to 512
2
characters can be used for each comment.
3
The clear button deletes all text in the comment text
4
box and the red marquee in the image.
Click the add button to add the comment to the com-
ment display area (4).
Repeat steps one through four to add additional comments. Up to 256 comments can be added to an
image.
The text comments can be edited. Image and audio comments can be added as well as text com-
ments. Refer to the DiMAGE Biz Software instruction manual.
Manual reference page
DiMAGE Biz Software - Adding text comments, 34-35. Adding audio comments, 36-37. Adding
image comments, 37. Adding nested comments, 38. Editing .mdm files, 41-43.
17
Advertisement
Table of Contents
