Pioneer AVH-P7950DVD/RC Service Manual page 103

5
[Calibration verification]
[Outline]
I Touch the center of the "+" cursor displayed on the screen. When touched correctly, the cursor will disappear,
and the next cursor will be displayed.
By repeating this 16 times, corrected value for each "+" point is obtained.
When the 17th point is touched as the last step, the corrected values for the 16 points and normally terminated
information are written into the EEPROM as a data of total 17 bytes. When the key is pressed,
the screen will return to the top menu.
I Refer to "EEPROM setting items" for the destination where the set values are stored in the EEPROM.
Refer to "calibration point" for the cursor displayed locations.
[Display specifications]
I 16 points adjustment in process
(Order of display of the locations to be pressed.)
5
6
This point is intended to end the calibration inspection, and therefore,
the corrected value of this point is not obtained.
AVH-P7950DVD/RC
6
7
7
8
A
B
C
D
E
F
103
8