Nokia E55-1 User Manual page 146

Wireless LAN plugins
Select Menu Ctrl. panel
>
Connection > Destinations, and an access point
group.
The extensible authentication protocol (EAP) plug-ins
are used in wireless networks to authenticate wireless
devices and authentication servers, and the different
EAP plug-ins make possible the use of various EAP
methods (network service).
You can view the EAP plug-ins currently installed in
your device (network service).
EAP plug-ins
1. To define the EAP plug-in settings, select
New access point
uses WLAN as a data bearer.
2. Select 802.1x
3. Select WLAN security settings
EAP EAP plug-in
>
Use EAP plug-ins
To use an EAP plug-in when you connect to a WLAN
using the access point, select the desired plug-in and
Options > Enable. The EAP plug-ins enabled for use
with this access point have a check mark next to them.
To not use a plug-in, select
To edit the EAP plug-in settings, select
Edit.
To change the priority of the EAP plug-in settings, select
Options Raise priority
146
>
in before other plug-ins when connecting to the
Settings and
>
and define an access point that
or WPA/WPA2 as the security mode.
WPA/WPA2
>
settings.
Options > Disable.
Options
to attempt to use the plug-
network with the access point, or
priority to use this plug-in for network authentication
after attempting to use other plug-ins.
See the device help for more information on EAP
plugins.
Session initiation protocol
(SIP) settings
Select Menu
Connection
The session initiation protocol (SIP) is used for creating,
modifying, and terminating certain types of
communication sessions with one or more participants
Options
>
(network service). Typical communication sessions are
video sharing and net calls. SIP profiles include settings
for these sessions. The SIP profile used by default for a
communication session is underlined.
>
To create a SIP profile, select
profile
>
profile.
To select the SIP profile you want to use by default for
communication sessions, select
profile.
Edit SIP profiles
>
Select Menu
Connection
Select Options
Profile name
•
Options
Ctrl. panel Settings
> >
SIP settings.
>
Options
Use default profile or Use existing
Options
Ctrl. panel Settings
> >
SIP settings.
>
Edit and from the following:
>
— Enter a name for the SIP profile.
Lower
>
and
New SIP
>
Default
>
and