Ad-c series 203 mm (8") 2-way coax baffle assembly pre-install enclosure for ad-c820 203 mm (8") 2-way coax blind-mount split ring and tile rails for ad-c821 round grille for 8" loudspeaker square grille for 8" loudspeaker 304 mm (12") 2-way coax baffle a (24 pages)
Page 2
To avoid a danger of subsequent damage to the apparatus, injuries to persons and/or the creation of additional safety hazards, all maintenance or repair work on the apparatus should be performed only by a QSC authorized service station or an authorized QSC International Distributor.
Page 3
Prepare Ceiling Refer to Figure 1. 1. Use the template provided to mark and cut a hole (1) in the ceiling where the loudspeaker is to be installed. For frame-construction ceiling, skip to “Wire the Loudspeakers”. 2. Install two V-rails (2), one on each side of the hole, and supported by the suspended-ceiling support rails (3).