Philips 41BDL7219L User Manual page 25

41BDL7219L
The 16th digit of the serial number corresponds to the position code of the module. Follow the ascending alphabetical order to
install the module to correct position. Refer to the diagram
To install the module to the hub board, the flat cable that connects between them has to be properly wired. One end of the flat
cable is already attached to the hub board, use the other end to connect it to the module. Before connection, make sure that
the arrow sign on the module is pointing up. Connect the flat cable to the connector on the module until it clicks into place. To
prevent reversed connection when connecting the cable, locate the star sign on the module first. Ensure that the star sign and
the red stripe on the cable match up (refer to the diagram
below on the proper order of installing the modules.
below.)
1
2
A
Module No.: xxxxxxxxxxxxxxx xxxxxxx
Module No.: xxxxxxxxxxxxxxx
1
3
14
B
C D
xxxxxxx
Module No.: xxxxxxxxxxxxxxx Module No.: xxxxxxxxxxxxxxx xxxxxxx
2 4
3
xxxxxxx