Using The Self-Timer - Kodak EasyShare Z1015 User Manual

Using the self-timer

Use the self-timer when you want to be included in a picture, or to ensure a steady
Shutter button press.
3 Compose the scene. Press the Shutter button halfway, then completely down.
The picture is taken after the delay.
To cancel the Self-timer during countdown, press the Self-timer/Burst button
press the Shutter button completely down.
Use the same procedure to use the self-timer in Video mode, but:
Turn the Mode dial to Video
■
■ Press the Shutter button completely down.
NOTE: The video stops when no storage space remains. Only the 2- and 10-second options are available in
video mode.
www.kodak.com/go/z1015support
1 Place the camera on a tripod or flat surface.
2 In most Still modes, press the Self-timer/Burst button
:
■ Once for a 10-second delay (so you have time to
get into the scene)
Again for a 2-second delay (for a steady,
■
auto-shutter release on a tripod)
■ Again for 2-shot (one picture taken after 10
seconds; another, 8 seconds later)
.
Doing more with your camera
, or
15