Checking And Resetting The Backsight Direction - Nikon NPL-302 Series Instruction Manual

Checking and resetting the backsight direction

You must complete a station setup before you use the BS check function.
This function always refers to the backsight point from the last ST record stored in
the current open job.
To enter the backsight (BS) check function,
1.
press [5] or select
menu.
HA Current HA reading
BS The HA to the BS in the last station
setup. Enter station coordinates for
observations without recording data
Do one of the following:
2.
– To reset the horizontal angle to the HA set
in the last station setup sight the BS and press the
[ENT] .
– To cancel the process and return to the BMS, press the
press [ESC]
BS Check
in the Stn Setup
.
Pulse Laser Station NPL-302 Series Instruction Manual 77
Applications 4
Reset
softkey or press
Abrt
softkey or
40.1