4
Solving camera problems
Status
Camera does not
turn on
Camera does not turn
off
Camera buttons and
controls do not function
In Review, a blue or
black screen is
displayed instead of
a picture
Pictures remaining
number does not
decrease after taking a
picture
Flash does not fire
Memory card is almost
or entirely full
The battery does not
charge using USB
charging
www.kodak.com/go/m380support
Solution
■
Make sure the battery is charged and installed correctly
page
1).
■
Transfer all pictures to the computer
■
Take another picture.
■
Continue taking pictures. The camera is operating normally.
(The camera estimates the number of pictures remaining after each
picture is taken, based on picture size and content.)
■
Check the flash setting, and change as needed
NOTE: The flash does not fire in all modes.
■
Transfer the pictures to the computer
■
Delete pictures from the card
■
See page 1
or visit
■
Insert a new battery
(see page
(see page
(see page
www.kodak.com/go/USBcharging.
(see page
1).
(see
6).
(see page
14).
6).
17) or insert a new card.
21