Kodak EasyShare DX4330 User Manual page 83

Camera
Problem
Part of the picture
is missing.
In Review mode,
you do not see a
picture (or the
expected picture)
on the LCD.
In Review mode,
pictures are
displayed as black
screens.
Picture orientation
is not accurate.
Camera freezes up
when a card is
inserted or
removed.
Chapter 10
Cause
Something was blocking
the lens when the
picture was taken.
Your eye or the picture
was not centered
correctly in the
viewfinder or LCD.
The camera may not be
accessing the correct
storage location.
Lens cap is on,
preventing lens from
extending.
The camera sensed that
it was rotated or tilted
while the picture was
taken.
Camera detects an error
when the card was
inserted or removed.
Solution
Keep hands, fingers, or other
objects away from the lens
when taking pictures.
Leave space around subject
when centering picture in
viewfinder or LCD.
Check the picture storage
location setting (page
Remove the lens cap.
Set the Orientation Sensor.
Turn off the Orientation
Sensor when your subject is
above or below you (such as
in the sky or on the floor).
Turn the Mode dial off, then
back on. Make sure the
camera is turned off before
inserting or removing a
card.
11).
71