Table of Contents
Advertisement
1-2
•
1x Serial ATA 150 connector
•
1x USB 2.0 header
•
1x CD-IN, 1x AUX-IN header
•
1 x IrDA header
10. Back Panel I/O
•
1x PS/2 Keyboard, 1x PS/2 mouse
•
1x Serial port connectors, 1x Parallel port connector
•
1x S/PDIF In connector
•
1x S/PDIF Out connector
•
AUDIO1 connector (Rear-Left / Rear-Right, Center/Subwoofer)
•
AUDIO2 connector (Mic-In, Line-In, Front-Left/Front-Right)
•
4x USB connectors, 1x RJ-45 LAN connector
11. Miscellaneous
•
ATX form factor
•
Hardware Monitoring – including Fan Speed, Voltages, CPU and system temperature
•
Supports Wake Up by LAN, Modem Ring, RTC Alarm, Keyboard and Mouse Power On
•
Supports STR (Suspend to RAM)
Supports Wake On LAN, Modem, but your ATX power supply 5V standby power must be able
to provide at least a 720mA current capacity. Otherwise, the functions may not work normally.
This motherboard supports the standard bus speeds of 100/66/33MHz that are used by specific
PCI, processor and chipset specifications. Exceeding these standard bus speeds is not
guaranteed due to the specific component specifications.
The Serial ATA controller only supports Ultra DMA/ATA100 or higher hard drive. Do not use
hard drives under this specification, or it won't work.
Specifications and information contained herein are subject to change without notice.
BH7
Chapter 1
Advertisement
Table of Contents
