Related Manuals for Neilsen CT2728
Summary of Contents for Neilsen CT2728
- Page 1 600W IMPACT DRILL CT2728 ORIGINAL MANUAL SAVE THESE INSTRUCTIONS AND PRECAUTIONS. READ ALL PRECAUTONS AND INSTRUCTIONS BEFORE USE. Cannon Tools Limited Address: 20 Station Road, Rowley Regis, West Midlands, B65 0JU.U.K.
- Page 2 EC DECLARATION OF CONFORMITY We CANNON TOOLS LTD 20 Station road, Rowley Regis, West Midlands,B65 0JU.U.K. Declare that the following machine complies with the appropriate basic safety and health requirements of the EC Directive based on its design and type, as brought into circulation by us.
-
Page 3: Table Of Contents
TABLE OF CONTENTS 1. TECHNICAL DATA………………………………………………………… … 2. INSTRUCTION AND ACCESSORIES……………………………………… 3. INTENDED USE……………………………………………………………… 4. DOCUMENT EXPLANATION……………………………………………… 5. SAFETY ADVICE……………………………………………………………… 8 6. PREPARATION……………………………………………………………… Attachable handle……………………………………………………………… 11 Depth gauge…………………………………………………………………… 11 Using screw tools……………………………………………………………… 11 7. OPERATION…………………………………………………………………… 12 Protective clothing……………………………………………………………… 12 Special safety advice…………………………………………………………… 12 Turning On/Off…………………………………………………………………... -
Page 4: Technical Data
TECHNICAL DATA Impact Drill Type CT2728 Operating power 220-240V~ 50 Hz Capacity 600W Idle rotation speed n 0-3000min 1.5 – 13mm Drill receptacle Protection class Maximum drilling capacity Wood 25mm Concrete 16mm Steel 13mm... -
Page 5: Instruction And Accessories
INSTRUCTION AND ACCESSORIES Impact drill front side 1. Drill Chuck 2. Changeover switch (Drilling / impact drilling) 3. Depth gauge 4. Tightening knob 5. Left/right rotation switch 6. On / Off button 7. Auxiliary handle... - Page 6 Detail graphic C (Attachable Handle) (c1) Depth gauge (c2) Depth gauge adjuster (c3) Handle...
- Page 7 This product must not be disposed together with the domestic waste. This product has to be disposed at an authorized place for recycling of electrical and electronic appliance. By collecting and recycling waste, you would help save natural resources. So make sure that the product is disposed in an environment friendly and healthy way.
-
Page 8: Intended Use
INTENDED USE This machine is intended for the impact drilling of concrete, stone, and brick. The general drilling operation is for wood, metal, ceramic, and plastic working, as well as tightening and loosening screws. • Only adults may use this tool. Any other usage is inappropriate. -
Page 9: Safety Advice
SAFETY ADVICE WARNING Read all safety warnings and all instructions. Failure to follow all warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mains operated (corded) power tool or battery operated (cordless) power tool. - Page 10 3) PERSONAL SAFETY a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
- Page 11 c) Disconnect the plug from the power source before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool.
-
Page 12: Preparation
PREPARATION Danger of injury! Danger of burning! Drills and chisels become very hot Before all adjustments and during operation. You can be settings: • Turn the machine off. burned by this. • Pull out the power plug. DANGER! • Change the drills or chisels •... -
Page 13: Operation
OPERATION Protective clothing • If possible, wear designated gloves for protection from splinters and shavings. • While working, wear designated protective goggles. Flying shavings can cause injury. • Wear hearing protection for protection against continuous noise in the work place. •... -
Page 14: Long Duration Operation
Long duration operation Danger of accident! If the machine should fall out of your hand during long duration operation, it will not automatically shut off. In this situation, immediately pull out the power plug and turn the machine off. To ensure a safe long duration operation: •Hold the machine securely at all times. -
Page 15: Tips For Working With Your Drill
Tips for working with your drill Drilling concrete and brick • Set the changeover switch (8) (Drill/ Impact drill) on the Impact Drill position. • Use the hard metal drill and a high rotation speed when working with brick or concrete. -
Page 16: Care And Maintenance
CARE AND MAINTENANCE Danger of injury! Before all care and maintenance work: • Turn the machine off. • Pull out the power plug. • Wait until the machine is still. DANGER! Cleaning Clean the machine regularly after each use from dust, shaving, wood splinters, etc. Clean the machine with a moist cloth and some soft soap. -
Page 17: Environmental Protection And Disposal
ENVIRONMENTAL PROTECTION AND DISPOSAL Packaging materials are raw materials and can be re-used. Sort out the different packaging materials and take then to a designated disposal facility. More information can be obtained through the responsible authorities. Old machines do not belong in household garbage! Professionally dispose of old machines! This contributes to environmental protection. -
Page 18: Troubleshooting
TROUBLESHOOTING Problem Possible cause Solutions No electricity comes Check the power supplier and the power to the machine. line. . The motor is Motor does Allow the machine to run idle for about 2 overloaded or not run. minutes so that it can cool down. overheated. - Page 19 CANNON TOOLS LTD Add: 20 station road, Rowley Regis, west midlands,B65 0JU.U.K. Made in China...