Page 1
CORDLESS HAMMER DRILL CT0584 ORIGINAL INSTRUCTION SAVE THESE INSTRUCTIONS AND PRECAUTIONS. Please read the entire instruction manual before using the product and then save it for future reference. We reserve the right for any errors in text or images and any necessary changes made to technical data.
In case of alteration of the machine, not agreed upon by us, this declaration will lose its validity. CORDLESS HAMMER DRILL Product description: Model: CT0584 Applicable EC Directives: EC Machinery Directive 2006/42/EC EC Directive of Electromagnetic Compatibility 2014/30/EU Harmonized standards EN 60745-1, EN 60745-2-1, EN 60745-2-2, EN 55014-1, EN 55014-2 20 Station Road, Rowley Regis, West Midlands, B65 0JU.U.K.
WARNING! For your own safety, read this manual and the general safety instructions carefully before using the appliance. Your power tool should only be given to other users together with these instructions. SYMBOLS The following symbols are used in this manual and/or on the machine: WARNING –...
Page 4
c) Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control. 2) Electrical safety a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
Page 5
Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents. d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. g) Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed.
NOT force the machine, let the machine to the work. This will reduce the wear on the machine and cutter increase its efficiency and operating life. Do not use this product with any attachment designed for mixing mortar, concrete, or plaster, or for any other type of mixing operation. ADDITIONAL SAFETY RULES CHARERS 1.
Page 8
3. A small leakage of liquid from the battery pack may occur under extreme usage or temperature conditions. This does not necessarily indicate a failure of the battery pack. However, if the outer seal is broken and this leakage comes into contact with your skin wash the affected area quickly with soap and water.
Page 9
COMPONENTS & CONTROLS (Fig.1) Keyless chuck Torque adjustment ring Two speed gear train (high-low) Forward / reverse switch Hand grip Belt clip Li-ion battery pack Battery release catch On / Off trigger switch LED light 9 ...
Note: Batteries will not reach full charge the first time they are charged. Allow several cycles (operation followed by recharging) for them to become fully charged. First read the safety instructions then follow the charging instructions. Plug the charger into a standard 230V~50Hz mains socket outlet, the green LED on the front left hand side of the charger will illuminate.
Page 12
indicator button (Fig 2). Charge level indicator Amount of charge remaining 0-10% 10-25% 25-50% 50-75% 75-100% OPERATING INSTRUCTIONS VARIABLE SPEED CONTROL (FIG.3) Simply apply light pressure to the trigger to start the drill on a slow speed. Increasing the pressure on the switch will increase the speed of the drill. Note: Your might hear a high pitched noise from the switch during use.
be concerned, this is a normal part of the switch function. FORWARD & REVERSE SWITCH This feature is selected via a slide switch located above the trigger, ( FIG.4) To select direction of the drill rotation simply push the button fully in on the left side for reverse rotation.
damaged. TORQUE ADJUSTMENT This feature allows setting of the torque or tightening power of your drill and depending on the application, various levels of driving power are required. When driving larger screw diameters a higher torque power is required to drive the screw until it’s properly seated.
To move belt clip, remove the screw that holds the belt clip in place then reassemble on the opposite side. Be sure to securely tighten screw. INSTALLING BITS Before fitting any drill bits set the forward/reverse button to the centre position.
Let the tool do the work. Warning! Be prepared for binding at bit breakthrough. When these situations occur, drill has a tendency to grab and kick opposite to the direction of rotation to grab and kick opposite to the direction of rotation and could cause loss of control when breaking through material.
MAINTENANCE This power tool normally requires no maintenance from time to time the ventilation slots on the motor casing should be cleaned out. If the unit should become defective, repair should be performed by an authorized service agent for electric tools. Avoid using solvents when cleaning plastic parts.
Page 19
SPARE PARTS LIST Name of part Name of part Chuck screw Tapping screw Chuck Moveable ring gear Tapping screw Planetary carrier Compressing plate Planetary gear Positioning spring Planetary carrier Torque setting ring Fixed ring gear Inner threaded ring Planetary gear Spring Washer Washer...
Page 20
CANNON TOOLS LTD Add: 20 station road, Rowley Regis, west midlands,B65 0JU.U.K. Made in China 20 ...