Agilent Technologies InfiniiVision 6000 Series User Manual page 235

6000 Series Oscilloscope User's Guide
Turn the Entry knob to adjust the Y1 or Y2 cursor when its
softkey is selected.
• X1 X2 — Press this softkey to adjust the X1 and X2 cursors
together by turning the Entry knob. The X value will
remain the same since the cursors adjust together.
You can adjust the X cursors together to check for pulse
width variations in a pulse train.
Y1 Y2 — Press this softkey to adjust the Y1 and Y2 cursors
•
together by turning the Entry knob. The Y value will
remain the same since the cursors adjust together.
Making Measurements 5
235