Installing The Display Panel - Dell Inspiron 1300 Service Manual

1 display panel
6. Press in both sides of the top flex-cable connector, and pull the top flex-cable connector away from the display connector.
1 inverter connector 2 pull-tab on bottom flex-cable connector 3 top flex-cable connector
4 display connector
7. Use the pull-tab to disconnect the bottom flex-cable connector from the inverter connector.
Installing the Display Panel
1. Connect the top flex-cable connector to the display panel connector.
2. Connect the bottom flex-cable connector to the inverter connector.
3. Lay the display panel into the top cover.
4. Replace the eight M2 x 3-mm screws that secure the display panel to the top cover.
5. Route the display-feed flex cable so that it rests in the notch located in the bottom edge of the top cover.
6. Replace the display bezel.
Back to Contents Page
Great user manuals database on
2 top cover 3 M2 x 3-mm screws (8)
UserManuals.info