Dell Inspiron 1012 Service Manual page 12

2. Press down the video accelerator card in the slot and place the processor heat sink on the system board.
3. Align the two captive screws on the processor heat sink with the screw holes on the system board and tighten the two screws.
4. Replace the palm rest assembly (see
5. Replace the hard-drive assembly (see
6. Replace the keyboard (see
7. Replace the battery (see
CAUTION:
result in damage to the computer.
Back to Contents Page
Great user manuals database on
Replacing the Palm Rest
Replacing the Hard-Drive
Replacing the Keyboard).
Replacing the Battery).
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
UserManuals.info
Assembly).
Assembly).