Replacing The Palm-Rest Assembly - Dell XPS L501X Service Manual

1 top cover
CAUTION:
7. Without pulling hard on the palm-rest assembly, place it away from the display as shown in the following illustration.
8. Lift the connector latch and pull the pull-tab to disconnect the touch-pad cable and the power button cable from the system-board connectors.
9. Lift the palm-rest assembly off the top cover.
1 power-button cable connector
3 palm-rest assembly
Replacing the Palm-Rest Assembly
1. Follow the instructions in
2. Slide the touch-pad cable and the power button cable into the system-board connectors and press down on the connector latches to secure the cables.
3. Align the tabs on the palm-rest assembly with the slots on the top cover and gently snap the palm-rest assembly into place.
4. Close the display and turn the computer over.
5. Replace the screw that secures the palm-rest assembly to the base cover.
6. Replace the battery (see
CAUTION:
result in damage to the computer.
Great user manuals database on
2 palm-rest assembly
Carefully separate the palm-rest assembly from the top cover to avoid damage to the palm-rest assembly.
2 touch-pad cable connector
Before You Begin.
Replacing the Battery).
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
UserManuals.info