Removing The Expresscard Board - Dell Studio 1555 Service Manual

Back to Contents Page
ExpressCard Board
Dell Studio™ 1555 Service Manual
Removing the ExpressCard Board
Replacing the ExpressCard Board
WARNING:
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
surface (such as the back panel) on the computer.
CAUTION:
is not covered by your warranty.
CAUTION:
inside the computer.
Removing the ExpressCard Board
1. Follow the procedures in
2. Remove the palm rest (see
3. Disconnect the ExpressCard cables from the connectors on the system board.
4. Remove the four screws securing the ExpressCard board to the computer base cover and remove the board.
1 ExpressCard board
3 ExpressCard cables
Replacing the ExpressCard Board
1. Connect the ExpressCard board cables to the system board connectors.
2. Place the ExpressCard board in position and replace the four screws to secure the board.
CAUTION:
result in damage to the computer.
3. Replace the palm rest (see
Great user manuals database on
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
To help prevent damage to the system board, remove the main battery (see
Before You Begin.
Removing the Palm Rest).
2 screws (4)
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
Replacing the Palm Rest).
UserManuals.info
Before Working Inside Your Computer) before working