Ryobi OWS1880 Manual page 3

Power tools are dangerous in the hands of untrained
users.
Maintain power tools and accessories. Check for
■
misalignment or binding of moving parts, breakage
of parts and any other condition that may affect the
power tool's operation. If damaged, have the power
tool repaired before use. Many accidents are caused
by poorly maintained power tools.
■ Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
■ Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to
be performed. Use of the power tool for operations
different from those intended could result in a hazardous
situation.
Keep handles and grasping surfaces dry, clean
■
and free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and
control of the tool in unexpected situations.
BATTERY TOOL CARE AND USE
■ Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used with
another battery pack.
■ Use power tools only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
■ When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause burns
or a fire.
Under abusive conditions, liquid may be ejected from
■
the battery; avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid ejected from
the battery may cause irritation or burns.
■ Do not use a battery pack or tool that is damaged or
modified. Damaged or modified batteries may exhibit
unpredictable behaviour resulting in fire, explosion or
risk of injury.
■ Do not expose a battery pack or tool to fire or
excessive temperature. Exposure to fire or temperature
above 130°C may cause explosion.
■ Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range specified in the instructions. Charging
improperly or at temperatures outside the specified
range may damage the battery and increase the risk of
fire.
SERVICE
■ Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
■ Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
CORDLESS WEED SPRAYER SAFETY WARNINGS
■ Always check for and repair leaks before using the
product.
■ Do not spray in the direction of people or animals.
Always spray downwind.
■ To reduce the risk of fire or explosion, do not use the
product with flammable liquids, such as gasoline or other
chemicals with a flashpoint below 55°C.
■ Be aware of any hazard presented by the chemical
solutions. Always follow the chemical manufacturer's
instructions on usage, handling, and storage. Refer to
chemical product Safety Data Sheet (SDS) for first aid
and handling precautions.
■ Do not use the product with any material where the
hazard is not known.
■ To help reduce the risk of injury, wear personal protective
equipment, such as face mask, gloves, safety footwear,
and upper-body protection, when doing the following:
● operating the product
● handling chemicals
● performing maintenance
■ Do not use flammable solvents or abrasive cleaning
agents to clean the product.
■ Operate the product only in temperatures between 0°C
and 40°C.
■ Store the product in a location where the ambient
temperature is between 0°C and 40°C.
■ Injuries may be caused, or aggravated, by prolonged use
of the product. When using any product for prolonged
periods, ensure to take regular breaks.
MIXING THE SOLUTION
■ Mix the chemicals strictly in accordance with the
manufacturer's instructions. Incorrect mixtures may
produce toxic fumes or explosive solutions.
■ Never use undiluted liquid plant control chemicals.
■ Prepare the solution and fill the container outdoors or in
well-ventilated areas only.
■ Prepare only sufficient solution for the job at hand so that
nothing is left over.
■ Do not mix different chemicals unless such mixture is
approved by the manufacturer.
FILLING THE CONTAINER
■ Before filling the container with solution, carry out a test
run with fresh water, and check all parts of the product
for leaks.
■ Stand the product on a level surface, and do not fill the
container above the maximum mark.
■ When filling from the tap, do not immerse the end of
the hose in the chemical solution. Sudden low pressure
in the system may cause the chemical solution to be
sucked back into the water supply.
■ Make sure that the tank cap is properly closed after
filling.
■ Hang a tag on the product to note the chemical solution
being used.
APPLICATION
■ Work only in the open or in well-ventilated locations,
such as in open greenhouses.
■ Never blow through nozzles or other components by
mouth.
3
Original Instructions