Dell Latitude E6410 ATG Service Manual page 32

Back to Removing and Replacing Parts
I/O port card
Dell™ Latitude™ E6410/E6410 ATG Service Manual
WARNING:
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
Removing the I/O port card
NOTE: You may need to install Adobe® Flash® Player from Adobe.com in order to view the illustrations below.
1. Follow the procedures in
2. Remove the
3. Remove the battery.
4. Remove the
5. Remove the
6. Remove the
7. Remove the
8. Remove the
9. Remove the
10. Remove the
11. Remove the keyboard.
12. Remove the
13. Remove the
14. Remove the modem.
15. Remove the
16. Remove the
17. Remove the
18. Remove the
19. Remove the screw that secures the I/O port card to the computer.
20. Lift the left edge of the I/O port card and remove the I/O port card from the computer.
Replacing the I/O port card
To replace the I/O port card, perform the above steps in reverse order.
Back to Removing and Replacing Parts
Great user manuals database on
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
Before Working Inside Your
ATG port cover (applicable on E6410 ATG computer only).
optical drive.
hard drive.
hinge covers.
access panel.
coin-cell battery.
Heat Sink and Processor fan.
LED cover.
display assembly.
palm rest.
modem connector.
ExpressCard cage.
palm rest.
system board.
UserManuals.info
Computer.