Dell Latitude E6410 ATG Service Manual page 3

Parallel Port
Serial Port
SATA Operation
Miscellaneous Devices
Latitude ON™ Reader
Keyboard Illumination
Video
Option
Ambient Light Sensor
LCD Brightness
Security
Option
Admin Password
System Password
Internal HDD Password
Password Bypass
Password Change
Strong Password
Great user manuals database on
Default Setting: ECP
Allows you to configure the integrated serial port. The options are: Disabled, COM1, COM2, COM3, and COM4
Default Setting: COM1
Allows you to configure the internal SATA hard drive controller. The options are: Disabled, ATA, AHCI, and RAID On
Default Setting: RAID On
Allows you to enable or disable the following devices:
Internal Modem
l
Module Bay
l
ExpressCard or PC Card
l
Media Card, PC Card and 1394
l
External USB Port
l
Microphone
l
eSATA Ports
l
Hard Drive Free Fall Protection
l
Camera and Microphone
l
Default setting: All enabled.
Allows you to configure the operating mode of the Latitude ON Reader. The options are: Disabled and Enabled
Default Setting: Enabled
Allows you to configure the keyboard illumination feature. The options are: Disabled, Auto ALS and Input, and Auto Input
Only
Default Settings: Disabled
Description
To enable the Ambient Light Sensor, select the Ambient Light Sensor check box.
Default Settings: Disabled
Allows you to set the display brightness depending up on the power source (On Battery and On AC).
Description
Allows you to set, change, or delete the administrator (admin) password. When set, the admin password enables several
security features including:
Restricts changes to the settings in Setup
l
Restricts the boot devices listed in the <F12> Boot Menu to those enabled in the "Boot Sequence" field
l
Prohibits changes to the owner and asset tags
l
Substitutes for the system and hard drive password
l
NOTE: You must set the admin password before you set the system or hard drive password.
NOTE: Successful password changes take effect immediately.
NOTE: Deleting the admin password automatically deletes the system password as well.
Default Setting: Not Set
Allows you to set, change, or delete the system password. When set, your computer requests you to enter the system
password every time your computer turns on or restarts.
NOTE: Successful password changes take effect immediately.
Default Setting: Not Set
This field lets you set, change, or delete the password on the system's internal hard disk drive (HDD). Successful changes take
place immediately and require a system restart. The HDD password travels with the hard drive, so the HDD is protected even
when installed in another system.
Default Setting: Not Set
Allows you to bypass the system and internal hard drive password prompts when your computer restarts or resumes from
standby.
You can set Password Bypass to Disabled and Reboot Bypass.
NOTE: You cannot bypass the system or hard drive password when you turn on your computer that has been shut down.
Default Setting: Disabled
Allows you to enable the disable permission to the System and Hard Drive passwords when the admin password is set.
Default Setting: Allow Non-Admin Password Changes checked
Allows you to enable of disable option to enforce strong passwords. If enabled, all passwords set on the computer must
contain at least one uppercase character, one lowercase character and be at least 8 characters long. Enabling this feature
automatically changes the default minimum password length to 8 characters.
Default Setting: Disabled
Allows you to enable or disable the Trusted Platform Module (TPM) on the computer.
NOTE: Disabling this option does not change any settings you may have made to the TPM, or delete any information or keys
you may have stored there.
UserManuals.info