Enabling The Enhanced Ide Function; Enabling The Super I/O Chip - AOpen AP61 User Manual

Hardware Setup

Enabling the Enhanced IDE Function

The jumper JP2 lets you enable or disable the enhanced IDE function.
To enable, simply close pins 2-3 of JP2. To disable, reset the jumper
to 1-2.
Enabled
Disabled

Enabling the Super I/O Chip

Set the jumper JP6 to 1-2 to enable the super I/O chip controller. If
you want to use a separate I/O card, disable the super I/O controller
by resetting JP6 to 2-3.
Enabled
Disabled
2-10
JP2
(default)
JP6
(default)
User's Guide