IBM BladeCenter QS20 Problem Determination And Service Manual page 40

22
BladeCenter QS20 Type 0200: Problem Determination and Service Guide
Message: "ERROR: file not found"
Reason The TFTP server received a valid request but is not able to satisfy it.
Action Check the filename and the permissions of the file that should be
downloaded.
Message: "ERROR: access violation"
Reason The TFTP server received a valid request but is not able to satisfy it.
Action Check the filename and the permissions of the file that should be
downloaded.
Message: "ERROR: illegal TFTP operation"
Reason The TFTP server received a valid request but is not able to satisfy it.
Action Check the filename and the permissions of the file that should be
downloaded.
Message: "ERROR: unknown transfer ID"
Reason The TFTP server cannot assign the data to a UDP packet based on its
transfer ID. It could be that another client is using the transfer ID for this
connection.
Action Reboot and retry the transfer. If the problem persists check the
configuration of your TFTP server with regards to the utilization of UDP
ports.
Message: "ERROR: no such user"
Reason The TFTP server received a valid request but is not able to satisfy it.
Action Check the filename and the permissions of the file that should be
downloaded.
Message: "ERROR: unknown error"
Reason The TFTP server received a valid request but is not able to satisfy it.
Action Check the filename and the permissions of the file that should be
downloaded.
Message: "TFTP: Received block <no>, expected block was <no>"
Reason The TFTP client received a packet that is out of order.
Action Reboot and retry the transfer.