Service And Maintenance; Maintenance; Technical Support - Siemens SITRANS WS100 Operating Instructions Manual

Speed sensor

Hide thumbs Also See for SITRANS WS100:

Table of Contents

Service and maintenance

4.1

Inspection

Periodically the cover should be removed and the sensor should be cleaned for dust and

grime buildup. If cleaning is required, disconnect the power and use a vacuum cleaner

and a clean, dry paint brush.

Wear on the bearings is detected by excess play or sound. If the bearings exhibit excess

play or produce an unreasonably loud sound, the speed sensor should be returned to

Siemens for repair.

Recommended spare parts

● Magnetic coupling

● Proximity Sensor

4.2

If you have any technical questions about the device described in these Operating Instructions

and do not find the right answers, you can contact Customer Support:

● Via the Internet using the Support Request:

Support request (http://www.siemens.com/automation/support-request)

●

Further information about our technical support is available on the Internet at

Technical support (http://support.automation.siemens.com/WW/view/en/16604318)

SITRANS WS100

Operating Instructions, 06/2011, 7ML19985LU02-00

Via Phone:

– Europe: +49 (0)911 895 7222

– America: +1 423 262 5710

– Asia-Pacific: +86 10 6475 7575

Table of Contents